Compatible Replacement Chip for HP 2700/3000  (non-OEM)

The chip resets the toner cartridge, so you can refill it and use it for another lifetime.

Its compatible with the HP Color Laserjet 2700/n, 3000/n/dn/dtn models only. 

The chip is a non locking device. Its not necessary to replace it, but doing so restores the toner level to 100% and removes the warning message.

Specific instructions included - Simply fits in place of the original on the side of the cartridge.   You must cut away some plastic from the housing to gain access. 

Available for the Black, Cyan, Magenta or Yellow, or as a Rainbow Pack with each of the four colours.

Please note you also need the correct toner powder for use with this model. We supply the chips only. The cartridge must be full of toner when you install the new chip or it will be useless.

Environmentally friendly!  Refilling cartridges saves raw materials, landfill waste, energy and CO2 emissions.

Save money! Refilling with high quality compatible toner and re-chipping gives excellent results and costs much less than buying an original cartridge.

Important! Ensure that your printer model, cartridge number and region match the details below.

• Product Name: HP 3000 Type Chip
• Compatible Models: HP Color Laserjet 2700/n, 3000/n/dn/dtn
• Cartridge No.: Q7560A Black, Q7561A Cyan, Q7563A Magenta, Q7562A Yellow
• Page Yield/Capacity: Up to 6,500 pages Black or 3,500 pages Colour at 5% nominal coverage
  
• Condition: New compatible
• Region: WW| Learn more
• Function: Resets the toner cartridge to enable and refilling or re-manufacturing.