Compatible Replacement Chip for Xerox Phaser 6110 (non-OEM) 

The chip resets the toner cartridge, so you can refill it and use it for another lifetime.

Its compatible with the Phaser 6110/N models. 

There is a killer chip. It locks out and stops you printing. You must replace it each time you refill to reset the cartridge and restore full functionality.

We send specific instructions for fitting, The chip sticks in place of the original on the bottom of the cartridge. The chip is slightly thinner than the original and the contacts sit slightly beneath the cartridge surface. You may need to put an extra bit of sticky pad beneath the chip to make the contacts connect.  The Starter Cartridges do not have a chip. You can stick one in place to convert to a normal cartridge.

Its for Western Europe and North America regions only.

Available for the Black, Cyan, Magenta or Yellow, or as a Rainbow Pack with each of the four colours.

Please note you also need the correct toner powder for use with this model. We supply the chips only. The cartridge must be full of toner when you install the new chip or it will be useless.

Environmentally friendly!  Refilling cartridges saves raw materials, landfill waste, energy and CO2 emissions.

Save money! Refilling with high quality compatible toner and re-chipping gives excellent results and costs much less than buying an original cartridge.

Important! Ensure that your printer model, cartridge number and region match the details below.

• Product Name: Xerox Phaser 6110 Type Chip
• Compatible Models: Phaser 6110/N
• Cartridge No.: 106R01274 Black, 106R01271 Cyan, 106R01272 Magenta, 106R01273 Yellow. 
• Page Yield/Capacity: Up to 2,000 pages Black or 1,000 pages Colour at 5% nominal coverage
  
• Condition: New compatible
• Region: W.EUR/NA| Learn more
• Function: Resets the toner cartridge to enable and refilling or re-manufacturing.